Share this topic on FacebookShare this topic on MySpaceShare this topic on Del.icio.usShare this topic on DiggShare this topic on RedditShare this topic on StumbleUponShare this topic on TwitterShare this topic on MagnoliaShare this topic on GoogleShare this topic on Yahoo

Author Topic: NETWORKING ISSUE: "Notification DLL not been registered. Program will not work"  (Read 4865 times)

0 Members and 2 Guests are viewing this topic.

Offline IH8U

  • Hero Member
  • *****
  • Posts: 649
Quote from: indiguns
So are we at least moderately certain that the HD is the main culprit, and a new HD will resolve the issues??


Yes your hard drive is failing, buy a new one!

http://www.newegg.com

Offline indiguns

  • New Member
  • *
  • Posts: 21
Just ordered a WD 120 GB Scorpio. With the 250 GB external I have as a backup that should be more than enough, and I hope at least enough to keep my dying laptop running for a few more years (I know I know it is unrealistic but I hate Vista and want to delay going on a Vista Computer for as long as possible.)

Once I Install it and get the stuff up and running, will touch base with all again. That will be my very first experience of opening the laptop body. So will have a true life experience.... :)

Offline Black Viper

  • Administrator
  • ******
  • Posts: 1906
  • "Have you tweaked your OS lately?"
    • Black Viper's Web Site
Once I Install it and get the stuff up and running, will touch base with all again. That will be my very first experience of opening the laptop body. So will have a true life experience.... :)

The first time is always the most memorable... whether good or bad. :)
Good luck!
Charles "Black Viper" Sparks
www.blackviper.com

Offline IH8U

  • Hero Member
  • *****
  • Posts: 649
The first time is always the most memorable...


You've nailed it. I remember when I built my first computer. Windows98, 400mhz Pentum II, 128mb ram, 8gb hard drive, 8mb video card and external US Robotics 56k modem. It cost me about $1300 and was smoking fast for its time.

Offline bphlpt

  • Full Member
  • ***
  • Posts: 153
my first computer. Windows98, 400mhz Pentum II, 128mb ram, 8gb hard drive, 8mb video card and external US Robotics 56k modem. It cost me about $1300 and was smoking fast for its time.


LOL, of course there are some applications, Web browsing,  and some actions, booting for example, where that computer's performance is still pretty fast compared to say ... Vista? :D

Cheers and Regards.

Offline indiguns

  • New Member
  • *
  • Posts: 21
my first computer. Windows98, 400mhz Pentum II, 128mb ram, 8gb hard drive, 8mb video card and external US Robotics 56k modem. It cost me about $1300 and was smoking fast for its time.


LOL, of course there are some applications, Web browsing,  and some actions, booting for example, where that computer's performance is still pretty fast compared to say ... Vista? :D

Cheers and Regards.



Vista seems to be the most useless reinvention of the wheel since ...(Anybody wanna help me here)...

Anyway, today when I actually saw my new HD, I got the jitters (it came without an installation manual) :(...

So the virgin in me is back again, asking all those experienced ones out there: Where can I look for a good (read dependable) guide to be able to install the HD in a RIGHT manner? " once again system specs: Dell Latitude D 600, with Windows XP pro. Anything in particular I need to be very cautious of (including the warnings the electronics items carry, of touching it only with a non-static glove kind of bs..Until now I have always treated them with the same contempt that I treat the warnings on each plastic bag "This bag is not a toy. Serious choking hazard etc..." But I intend to respect the opinions of the experienced ones..so that my first experience is memorable, but not because of accidents...)

Offline indiguns

  • New Member
  • *
  • Posts: 21
my first computer. Windows98, 400mhz Pentum II, 128mb ram, 8gb hard drive, 8mb video card and external US Robotics 56k modem. It cost me about $1300 and was smoking fast for its time.


LOL, of course there are some applications, Web browsing,  and some actions, booting for example, where that computer's performance is still pretty fast compared to say ... Vista? :D

Cheers and Regards.



Hey all...
Thank you all very very much for unending help throughout a time when I was sitting clueless with the disfunctional computer. I did recently change the HD, and after a few hiccups (connecting the HD without a connector), I managed to get the original configuration back. Since the old HD was still alive, I did buy an Icy Dock external enclosure to try and rescue some data from the old HD (chiefly stuff that I had done since the last update 3 months ago. That is another story altogether (The enclosure works fine or so it seems, but the computer registers an "unrecognised USB item"). So other than the head ache of trying to deal with that unless I know for sure that it is beyond redemption) the new HD is working very well. Just wanted to thank all those who viewed and responded to my SOS posts. Appreciate all the effort by everybody.

Indi

Vista seems to be the most useless reinvention of the wheel since ...(Anybody wanna help me here)...

Anyway, today when I actually saw my new HD, I got the jitters (it came without an installation manual) :(...

So the virgin in me is back again, asking all those experienced ones out there: Where can I look for a good (read dependable) guide to be able to install the HD in a RIGHT manner? " once again system specs: Dell Latitude D 600, with Windows XP pro. Anything in particular I need to be very cautious of (including the warnings the electronics items carry, of touching it only with a non-static glove kind of bs..Until now I have always treated them with the same contempt that I treat the warnings on each plastic bag "This bag is not a toy. Serious choking hazard etc..." But I intend to respect the opinions of the experienced ones..so that my first experience is memorable, but not because of accidents...)


Offline IH8U

  • Hero Member
  • *****
  • Posts: 649
I'm sure what your trying to say indiguns, do you need some help? Hows the installation going?

Offline bphlpt

  • Full Member
  • ***
  • Posts: 153
Hey all...
Thank you all very very much for unending help throughout a time when I was sitting clueless with the disfunctional computer. I did recently change the HD, and after a few hiccups (connecting the HD without a connector), I managed to get the original configuration back. Since the old HD was still alive, I did buy an Icy Dock external enclosure to try and rescue some data from the old HD (chiefly stuff that I had done since the last update 3 months ago. That is another story altogether (The enclosure works fine or so it seems, but the computer registers an "unrecognised USB item"). So other than the head ache of trying to deal with that unless I know for sure that it is beyond redemption) the new HD is working very well. Just wanted to thank all those who viewed and responded to my SOS posts. Appreciate all the effort by everybody.

Indi



IH8U, I think this was the new part of his message.  Probably just typed in the wrong place when he tried to quote a previous message.

Cheers and Regards.

Offline IH8U

  • Hero Member
  • *****
  • Posts: 649
IH8U, I think this was the new part of his message.  Probably just typed in the wrong place when he tried to quote a previous message.


Thanks, I didn't even notice that. :)

Offline indiguns

  • New Member
  • *
  • Posts: 21
I installed the new hard drive. And much as the installation itself was the easiest part, the real can of worms opened after that. Since all this while I was just doing backups (WD external 250 GB HD, using the WD software creating bkf files) and had never had an opportunity to find out how to restore the backups, I was totally like a guy who got hit hard on the head and has had total amnesia ever since.  ???  ???

Hoping to be able to use the icy-dock hard drive enclosure to get some data out of my dead hard drive was no good either. Each time I run it, I can hear the drive running inside but there is no response to try and open the files inside... >:(:o :o

Anyway, starting to learn how to restore the backups (from .bkf files created from the WD...) if anybody has faced problems with the icy dock and has been able to resolve it, please...I need help desperately... :'( :'(

Offline bphlpt

  • Full Member
  • ***
  • Posts: 153
Hoping to be able to use the icy-dock hard drive enclosure to get some data out of my dead hard drive was no good either. Each time I run it, I can hear the drive running inside but there is no response to try and open the files inside... >:(:o :o


If the drive is dead, it's dead.  The enclosure won't help it.  In fact, depending on what the actual failure is, each time you try to read it, it very well might be destroying more and more of the data.  There are a couple more things you can try.  Try one of the various programs available that try to brute force copy the data from the damaged drive to a good drive, Unstopable Copier is one I've used in the past. A last resort would be to get some sort of data recovery software.  Ontrack Easy Recovery Pro is one I have used.  A trial version is available and you might be able to find a copy at a reasonable price on ebay or somewhere.  It can read the raw data from the drive, so you've got a chance.  Good luck and keep us informed.

Cheers and Regards.